
Free Intelligent Life
Proper battery care ensures optimal performance. Charge the 28 Ah lithium battery using the official charger whenever capacity drops below 60%. Avoid over-discharging by disconnecting when battery level reaches 20% (indicated by the five-segment LED meter). Full charge takes approximately 5 hours, and the battery should last around 4 kWh per 100 km. Always store in a cool, dry place to prevent capacity degradation.
Monthly check for wear on tires, wheels, and bearings is essential. Ensure tread depth remains above 2 mm and replace if damaged. Lubricate the drive motor and gearbox with silicone-based grease every three months. Verify that the 12.5″ rear wheels and 8″ front wheels maintain proper inflation at 2.2 MPa. Tighten all bolts on the frame and folding mechanism to prevent loosening during use.
Wipe down the aluminum alloy chassis with a damp cloth after outdoor use to remove dust and salt residue. Clean the brushless motor housing periodically to prevent debris buildup. For waterproofing, ensure the IPX4-rated enclosure remains intact against splashes. Use mild soap for stubborn stains but avoid submerging any electrical components.

Periodically verify sensor calibration via the control panel’s diagnostic mode. Test emergency stop functionality by simulating hand-off scenarios. Ensure the UWB and ultrasonic sensors operate correctly in various environments. Replace damaged wiring harnesses promptly to maintain EMC compliance per GB/T 18029.21-2012 standards.
For detailed warranty information, visit airwheel.net regarding battery replacement policies or motor repairs under the 12-month coverage.battery maintenance tire inspection motor lubrication chassis cleaning sensor calibration emergency stop test waterproofing bearing check gearbox service wheel inflation frame tightening software diagnostics UWB technology ultrasonic sensors EMC compliance warranty details lithium storage safety verification